PUBLICATIONS IN PROCEEDINGS
2008
Nair, S.S., S. Wang , D. Hurley. 2008. Evaluation of interphase properties in fiber reinforced polymer composite using contact resonance force microscopy. Proceedings of the 51th International Convention of Society of Wood Science and Technology, November 10-12, Concepción , Chile . Pp. 1-9.
Cheng, Q., S. Wang , T.G. Rials, J. Wang, Y. Liu. 2008. Cellulose fibril reinforced poly(vinyl alcohol) nanocomposites. Proceedings of IAWPS 2008, Harbin China , September 27-29. pp. 7-8.
Cheng, Q., S. Wang , D.Y. Harper, J. Wang, Y. Liu. 2008. Elastic modulus of single cellulose fibrils evaluated by atomic force microscopy. Proceedings of IAWPS 2008, Harbin China , September 27-29. pp.531-533.
Zhou, Z., Y. Zhang and S. Wang . 2008. Nano-mechanical properties of the pre-compressed poplar cell wall based on nanoindentation. Proceeding of IPC working Party on Harvesting and Utilization of Poplar and Willow Wood conference, Engineered wood Products Based on Poplar/Willow Wood, Nanjing , China , October 21-24. Pp55-64 (ISBN 9789080656574).
Zhang, Y. and S. Wang . 2008. The wettability change of PF resin on the surface for wood strand under different drying conditions. Proceeding of IPC working Party on Harvesting and Utilization of Poplar and Willow Wood conference, Engineered wood Products Based on Poplar/Willow Wood, Nanjing , China , October 21-24. Pp152-159 (ISBN 9789080656574).
Taylor , A.M., O. Hosseinaei and S. Wang . 2008. Mold susceptibility of oriented strandboard made with extracted flakes. Paper presented at the 39th Annual Meeting of the International Research Group on Wood Preservation, Istanbul , Turkey 25-29 May. IRG/WP 08-40402. pp. 8.
2007
Cheng Q., S. Wang . 2007. Cellulose fibrils isolated from Lyocell fiber by a novel process and its reinforced PVA nanocomposites. International Symposium on Advanced Biomass Science and Technology for Bio-based Products, May 23-25, 2007 , Beijing , China (In press).
2006
Wang, S. 2006. Enhancing composite durability via pressing technology. Wood Protection 2006. HM Barnes edited. P.181-185.
Wang, S., Q. Cheng, T. Rials and S.-H. Lee. 2006. Cellulose microfibril/nanofibril and its nanocompsites.
Proceedings of the 8th Pacific Rim Bio-Based Composites Symposium, edited by
M.N.M. Yusoff et al. Nov. 20-23, 2006. Kuala Lumpur,
Malaysia. Pp. 301-308 (ISBN 983-2181-87-9).
Wang, S., S.-H.
Lee, W. Tze, GM Pharr, TG Rials.
2006. Investigating nano-mechanical properties of the
wood and its composites by continuous nanoindentation.
Proceedings of the 8th Pacific Rim Bio-Based Composites Symposium, edited by
M.N.M. Yusoff et al.
Lee, S.H. and S. Wang . 2006. Thermal analysis and nano-mechanical properties of natural fiber or cornstarch-reinforced biodegradable biocomposites. ANTEC 2006. Charlotte , NC . May 7-11. Pp. 228-232.
Wang, S , Q. Cheng, T.G. Rials, K. Kit and M. Hansen. Fiber-reinforced Polypropylene composites from small-diameter southern pine trees by wet process. The 1 st International conference on Energy Conversion and Efficient Utilization of Woody Biomass (CECUWB), May 14-16, 2006 , Beijing , China . Pp. 250-256. pdf
Wang, S. , S.H. Lee, W.T.Y. Tze, T. Rials, G.M. Pharr. 2006. Nanoindentation as a tool for understanding nano-mechanical properties of cell wall and biocomposites. 2006 International conference on Nanotechnology, Marriott Marquis, Atlanta , GA , April 26-28. 7pp. pdf
2005
Wang, S. , G. Du, and Y. Zhang. 2005. Microwave Wood Strand Drying: Energy Consumption, VOC Emission and Drying Quality . Proceeding of the 3rd Inter-American Drying conference, Montreal , Canada . 10pp. pdf
Ye, X.P., S. Wang , R. Ruan, A. Womac, P. Chen, J. Qi, D. Hayes, and U. Tschimer. 2005. Water mobility and mold susceptibility in engineered wood products—a magnetic resonance aspect. 2005 American Society of Agricultural Engineers (ASAE) Annual International Meeting, Tampa Convention Center, Tampa, Florida, July 17-20. 13pp.
2004
Zhang, Y. and S. Wang . 2004. Surface characteristics of commercial wood strands using the Wilhelmy plate method. Proceeding of the 7 th Pacific Rim Bio-based Composites Symposium. Oct. 31 to Nov. 2, 2004. Nanjing, China. Volume 1, Pp. 126-133.
Wang, S., H. Gu and T. Neimsuwan . 2004. Understanding properties of commercial OSB products. Proceeding of the 7 th Pacific Rim Bio-based Composites Symposium. Oct. 31 to Nov. 2, 2004. Nanjing, China. Volume 2, Pp. 397-399.
Garcia, P.J. and S. Wang . 2004. Influence of internal mat environment on dielectric cure monitoring during OSB hot-pressing. Proceeding of the 7 th Pacific Rim Bio-based Composites Symposium. Oct. 31 to Nov. 2, 2004. Nanjing, China. Volume 1, Pp. 144-150.
Wang, S. and C. Dai. 2004. Press Control for Optimized Wood Composite Processing and Properties. Part 2. Properties and Press Control Strategies. General Technical Reports FPL-GTR-149, Forest Products Laboratory, USDA Forest Service. Pp. 65-82.pdf
Dai, C and S. Wang . 2004. Press Control for Optimized Wood Composite Processing and Properties. Part 1. Pressing variable and sensors. General Technical Reports FPL-GTR-149, Forest Products Laboratory, USDA Forest Service. Pp. 54-64.pdf
2003
Wang, S., H. Gu, T. Neimsuwan
and S.G. Wang. 2003. Layer thickness swell and related
properties of commercial OSB products: A comparative study. Proceedings
of the 37th International Particleboard
and Composite Materials Symposium.
2002 and earlier
Wang, S., and P.M. Winistorfer. 2000. Unsteady contacting phase during
hot pressing and its influence on resin cure and bond formation. Proceeding of Wood Adhesives 2000,
Wang, S., and P.M. Winistorfer. 2000. Unsteady contacting phase during
hot pressing and its influence on resin cure and bond formation. Wood Adhesives 2000 Extended Abstracts,
Winistorfer, P.M.; S. Wang. 1999. Densification of wood composite
mats during pressing: Implications of mat structure and pressing schedules on
density profile formation and panel properties. Proceedings
of the Fourth International Conference on the Development of Wood Science, Wood
Technology and Forestry.
Wang, S.; P.M. Winistorfer.
1999. Flake compression behavior in a resinless mat
related to dimensional stability. Abstract in: Proceedings of the Fourth
International Conference on the Development of Wood Science, Wood Technology
and Forestry.
Wang, S.; P.M. Winistorfer
and T.M. Young. 1999. Vertical density formation and step-closure
pressing of medium density fiberboard. Abstract in
biographies and Abstracts. 53rd Annual Meeting of
the
Wang, S.; P.M. Winistorfer.
1999. Flake compression behavior in a resinless mat
related to dimensional stability. Abstract in biographies
and Abstracts. 53rd Annual Meeting of the
Wang, S.; P.M. Winistorfer.
1999. The effect of species and species distribution on the layer
characteristics of OSB. Abstract in Proceedings of the
33rd International Particleboard and Composite Materials Symposium.
April 12-15, 1999.
Wang, S.; P.M. Winistorfer.
1999. Localized compression behavior and dimensional stability in OSB. Abstract in Proceedings of the 33rd International
Particleboard and Composite Materials Symposium. April 12-15, 1999.
Winistorfer, P.M.; S. Wang; W.W. Moschler. 1998. Dynamics of wood composite mats during consolidation: Monitoring density development during pressing with an in-situ density monitoring system. Proceedings of the Second European Panel Products Symposium. LIandudno, Wales, 21-22 October, 1998, p12-23.
Wang, S.; P.M. Winistorfer. 1998. An optical technique for determination of layer thickness swell of wood composites. Abstract in Proceedings of the Second European Panel Products Symposium. LIandudno, Wales, 21-22 October, 1998, p275.
Wang, S.; P.M. Winistorfer.
1998. Effects of step-closure on the vertical density profile of wood
composites. Abstract in Proceedings of the 32nd
International Particleboard and Composite Materials Symposium. March
1998.
Winistorfer, P.M.; W. Moschler;
C. Helton; M. Weaver; S. Wang; J. Idassi
and C. Andrews. 1998. Water soak and high humidity exposure effects on
properties of whole-panel OSB and plywood. IN: Engineered Systems Using
Structural Panels, Proceedings No. 7272. Proceedings of
50th Anniversary Meeting of the Forest
Products Society.
Winistorfer, P.M.; W. Moschler; C. Helton; M.
Weaver; S. Wang; and J. Idassi.
1997. Water soak and high humidity exposure effects on properties of
whole-panel OSB and plywood. Abstract IN: Abstracts of Technical Sessions
and Technical Forum Presentations. 50th Anniversary
Meeting of the
Wang, S. Review of wood and bamboo floor in China, Proceedings of fifth Symposium of the Forestry Society of East China, Oct. 1995, Fujian, p.102-105.
Wang, S-G; S. Wang. Measuring the sound insulation of composite board with corrugated core, Proceedings of fourth Symposium of the Forestry Society of East China, Oct. 1994, Shanghai, China, p.99-103.
Wang, S.; Y. Hua. Study on the technology of composite OSB made of poplar wood and bamboo, International Symposium on the Utilization of Fast-growing Trees, Oct. 15-17, 1994, Nanjing, PR China, p329-334.
Hua, Y.; S. Wang; G. Du. Research on the technology of laminated veneer lumber of fast-growing poplar, International Symposium on The Utilization of Fast -growing Trees, Oct. 15-17, 1994, Nanjing, PR China, p379-385.
Hua,
Y.; S. Wang; Wang, S-G. Development of
structural bamboo composites strength properties and glue bond durability of
bamboo plywood and bamboo curtain board, Adhesive technology for tropical
Woods Symposium, No.5, 1992,
Wang, S.; Y. Hua.
Study on the dimensional stability of composite OSB made from bamboo &
wood, Pro. of Second Symposium of the Forestry
Society of
Wang, S. Procession and Utilization of Fast-growing
poplar, Pro. of Second Symposium of
the Forestry Society of East China, Oct. 1992, Yantai,
Wang, S. Present situation of fast-growing poplar utilization, Proc. of Second Symposium of the Forestry Society of East China, Oct. 1992, Yantai, Shangdong Province, China, p.4.
Hua,
Y.; S. Wang. Initial study of processing technology of poplar
LVL, In symp. Proc. of the Society of Wood
Science of
Wang, S.; Y. Hua.
Research of hot pressing technology of oriented strand composite, Proc. of
4th Annual Symposium of Wood Science Society of Jiansu
Province ,
1987,
Please address all comments to swang@utk.edu